Voltstair X-Climber EveryLift 3 in 1 Electric Stair Climber and Lift, 375 lb.

Voltstair X-Climber EveryLift 3-in-1 Electric Stair Climber and Lift

The Voltstair X-Climber EveryLift is a 3-in-1 powered material handling machine that combines a stair climber, electric lift and flat-ground transporter in one unit. With a 375 lb (170 kg) load capacity and a maximum loading board height of 40.4 inches, it is designed to help move, lift and position heavy equipment without relying on manual lifting at each stage of the job.

The EveryLift uses a 48V 400W motor and provides two stair climbing speeds, allowing operators to select 22 steps per minute for controlled movement or 36 steps per minute for faster travel. Its electric lifting system raises loads to approximately 40 inches, while photoelectric sensors automatically adjust the platform height for pickup and placement.

Key Features

• 3-in-1 Material Handling: Combines powered stair climbing, electric lifting and flat-ground transportation in one machine.
• 375 lb Load Capacity: Supports loads weighing up to 375 lb (170 kg) for demanding commercial material handling applications.
• 40.4 Inch Maximum Lift Height: Raises the loading board to approximately 40.4 inches for vehicle, counter, bench and equipment loading applications.
• Photoelectric Auto-Lift Sensors: Automatically adjust platform height to assist with load pickup and placement.
• Two Stair Climbing Speeds: Slow mode operates at 22 steps per minute, while fast mode reaches 36 steps per minute.
• Up to 117 Flights Per Charge: Provides approximately 52 to 117 flights of stair climbing per charge depending on load and operating conditions.
• 320 to 370 Lift Cycles: The battery provides approximately 320 to 370 lifting cycles per charge.
• Adjustable Support Legs: Stabilize the frame during powered lifting operations.
• Anti-Pinch Protection: Helps protect the operator during operation of the powered lifting system.
• Emergency Stop: Provides an emergency shutdown control for added operational safety.
• Integrated Braking: Helps control the machine during stair travel and positioning.
• Automatic Locking: The system can automatically lock in response to abnormal tilt or when approaching a stair edge.
• Flat-Ground Transport: Allows the unit to move loads across level surfaces before or after stair travel.
• IP54 Protection: Provides protection against dust and water splashes under the specified protection rating.

Electric Lift and Stair Climber in One Machine

The EveryLift is designed for jobs where a load needs to be lifted as well as transported over stairs. The powered lifting function can help with loading and unloading from vehicles, positioning equipment at working height and transferring items onto elevated surfaces.

Photoelectric sensors automatically adjust the platform height during pickup and placement, reducing the need for the operator to manually raise or lower the load to meet the loading surface.

Powered Stair Climbing

The 48V 400W direct-current motor provides powered stair climbing in two speed settings. The slower 22-step-per-minute setting is suited to controlled movement, tighter stairwells and situations where a slower travel speed is preferred. The 36-step-per-minute setting provides faster movement on suitable open stairways.

Depending on load and operating conditions, the EveryLift provides approximately 52 to 117 flights per charge. On a standard 16-step flight, this corresponds to approximately 830 to 1,870 steps. Actual endurance will vary according to load weight, stair conditions and the amount of lifting versus stair climbing performed.

Stabilized Electric Lifting

Adjustable support legs help stabilize the machine when the electric lift is being used. The lifting system provides a 39.4-inch stroke and a maximum loading board height of 40.4 inches, making it suitable for applications where loads need to be raised from vehicle or ground level to an elevated working position.

Safety and Protection Features

The EveryLift incorporates multiple safety systems for powered material handling. Emergency stop controls, anti-pinch protection, integrated braking and automatic locking help provide controlled operation. The unit also features adjustable support legs for stability during lifting and operates at a noise level below 70 dB.

Commercial Material Handling Applications

The Voltstair X-Climber EveryLift can be used by appliance installers, HVAC and mechanical contractors, medical and laboratory equipment providers, facilities teams, warehouse personnel, moving companies, delivery operations and industrial material handlers. Its combination of lifting, stair climbing and flat-ground transport allows one machine to perform multiple material-handling functions.

Specifications

• Weight Capacity: 375 lb (170 kg)
• Unit Weight: 123 lb (56 kg)
• Motor: 48V 400W direct current
• Lifting Stroke: 39.4 in (1 m)
• Maximum Rise of Loading Board: 40.4 in (1.025 m)
• Lift Ascending Speed: 31 seconds per meter
• Lift Descending Speed: 31 seconds per meter
• Lift Cycles Per Charge: 320 to 370
• Stair Climbing Endurance: 52 to 117 flights per charge
• Climbing Speed: 22 steps per minute in slow gear; 36 steps per minute in fast gear
• Lift Positioning: Photoelectric sensors with automatic platform height adjustment
• Stabilizers: Adjustable support legs
• Safety Systems: Emergency stop, anti-pinch protection, integrated braking and automatic locking
• Functions: Stair climbing, electric lifting and flat-ground transport
• Noise Level: Under 70 dB
• Protection Grade: IP54
• Assembly: No assembly required
• Platform Dimensions: 17 x 10.63 in

One Machine for Lifting, Transport and Stair Climbing

The X-Climber EveryLift is designed for material handling routes that involve more than stairs alone. Its electric lift can assist with loading and placement, its flat-ground transport function handles movement across level surfaces, and its powered stair-climbing system handles stair travel. This combination provides a single solution for applications that would otherwise require separate lifting and stair-climbing equipment.